As a property owner for over 50 years, I’ve seen first-hand how water bills can add up if you’re not mindful.
The good news is that with a few practical adjustments, some help from a licensed plumber – and some smart habits, you can see some real savings.
Here’s my guide on how to save on water bills with simple, effective plumbing tips that can make a noticeable difference.
- Fix Leaky Taps and Toilets Promptly
I chat regularly with experienced plumbers like Plumb It Right about plumbing issues.
They tell me that dripping taps might seem harmless, but they can waste hundreds of litres of water every month.
I’ve come across leaks that, when left too long, add a big chunk to the water bill.
Fixing a leaky tap is usually quick and inexpensive, and it can save you plenty in the long run.
The same goes for your toilet—if it’s running continuously, it’s wasting water.
My tip: Regularly inspect your taps and toilets, and get in touch with a decent plumber if you need a hand with repairs. It’s worth it.
- Install Water-Saving Fixtures
In my experience, one of the easiest ways to save water is to switch to water-saving taps and plumbing fittings and fixtures.
These include low-flow showerheads, tap aerators, and dual-flush toilets.
These fixtures are designed to limit water usage without sacrificing pressure or quality. I’ve installed them in my homes, and I am amazed at the savings we see on our bills.
- Take Shorter Showers
I know, we all enjoy a long, relaxing shower. But cutting back your shower time by even a couple of minutes can make a big difference.
If each person in your home reduces their shower time, the savings really add up. You can even set a timer or listen to a short song to remind yourself when it’s time to finish up.
Did you know? The average shower uses around 9 litres of water per minute. Imagine the savings with just a few minutes shaved off!
- Use Your Washing Machine and Dishwasher Efficiently
When it comes to appliances, washing machines and dishwashers use a significant amount of water.
Always try to run full loads, as this maximises efficiency. You should avoid using the “half load” setting—despite what it suggests, it often uses nearly as much water as a full load.
And if your appliances are old, it might be time to upgrade.
Many modern machines have eco-friendly settings that use much less water per cycle.
- Switch to a Tankless Water Heater
In a traditional water heater, you’re constantly heating a large tank of water, even when you don’t need it.
This wastes both water and energy.
Tankless water heaters, on the other hand, heat water on demand. They’re efficient and can help cut down on water use since you’re not waiting around for hot water.
I’ve installed a few in my homes, and have noticed a dip in both water and energy bills.
- Water Your Garden at the Right Time
If you have a garden, try to water it during the early morning or late evening.
During these times, less water evaporates due to lower temperatures.
I recommend installing a timed sprinkler system as well, which ensures you don’t accidentally leave it running longer than necessary.
Plus, if it’s set on a timer, you’re less likely to overwater, which not only saves water but also keeps your garden healthier.
- Collect Rainwater for Outdoor Use
If your area gets a fair bit of rain during the cooler months, this is an excellent opportunity to save water for outdoor use.
You can collect rainwater in barrels to use for gardening, washing your car, or even cleaning outdoor areas.
Not only does this save water, but it’s also a great way to be environmentally friendly.
My Tip: Position your barrels near downspouts to maximise rainwater collection.
- Insulate Your Pipes
If your hot water pipes aren’t insulated, it takes longer for hot water to reach your taps.
This means you’re wasting water while waiting for it to heat up.
Insulating your pipes can reduce this waste and save on your water and energy bills.
I’ve insulated most of my pipes where I can. It’s a small job that gives big savings.
- Check Your Water Meter for Hidden Leaks
A hidden leak can silently waste water and drive up your bill without you even knowing.
To check, turn off all taps and water-using appliances in your home, then take a look at your water meter.
If it’s still running, you might have a hidden leak somewhere.
I recommend doing this check every few months, especially if you notice a sudden increase in your water bill.
- Educate Your Family About Water Conservation
Finally, it’s important to get everyone in the household on board.
Even small habits—like turning off the tap while brushing teeth or waiting until you have a full load to run the dishwasher—can add up to significant water savings.
Educating everyone ensures that water-saving becomes a family habit, and the savings on your bill will reflect that.
My Final Thoughts
Water conservation doesn’t have to be complicated.
With these ten simple tips, you’re not only reducing your water bill but also helping the environment.
If you ever need help with plumbing upgrades or have a pesky leak that just won’t go away, call either Plumb It Right or a qualified plumber with great reviews. Get one with no call-out fees and that is dedicated to quality service.
Let’s work together to make your home as water-efficient as possible.
